Screen test
Dirty screen test
Fill the screen with one even grey at a time and look for blotches, bands and darker patches that drift past as things move: the dirty screen effect.
→Space next grey← backP panG gridF full screenEsc close
What the dirty screen effect looks like
On a screen showing one even colour, every part should look the same. A panel with the dirty screen effect (often shortened to DSE) shows blotches, vertical or horizontal bands, or a smudged, uneven look, as if the glass were dirty. You hardly notice it in a busy picture. It jumps out when the camera pans across something plain, such as a football pitch, an ice rink or a blue sky, because the picture moves while the blotches stay put on the panel.
That is why the test has a pan. With Pan on, faint lines drift slowly across the grey, like the markings on a pitch. Watch the grey between them rather than the lines: patches that stay still while the lines move are the panel's, not the picture's.
Advertisement
How to run it
- Use the screen in the conditions you watch in: a dim room for a TV, normal light for a monitor. Let it warm up for a few minutes.
- Turn off motion smoothing and dynamic contrast if you can, since they change the picture in patches.
- Start at 20% grey with the pan on, then step through the levels with the arrow keys or a tap. Sit at your usual distance; DSE you only see from a foot away rarely matters.
- Press G for a faint grid if you want to note where a patch sits, for a support request or a second look later.
Which grey shows what
- 5% and 10%: near black, where OLED panels show their unevenness: faint vertical bands and a slightly blotchy, "grainy" look in dark scenes.
- 20% to 40%: the range most people mean by DSE, on LCD and OLED alike. Pitches, rinks and skies in sport fall here.
- 50% and 75%: brighter greys show darker corners, vignetting and a coloured tint on one side of an LCD.
- Black: a full black screen. On OLED it should look like a screen switched off; on an LCD in a dark room it shows the glow and light leaks the backlight bleed test looks at in detail.
Advertisement
Is it normal, and can it be fixed?
Some unevenness is normal on every large panel, and how much varies from one unit to the next of the same model, which is why buyers call it the panel lottery. On LCD screens it comes from the backlight and the layers that spread its light, and pressure on the panel can make it worse; on OLED it comes from small differences in how bright each pixel is at low levels. No setting removes it. Lowering sharpness or brightness can make it less obvious, and some OLED TVs run a panel refresh routine that can even out near-black banding, so check the maker's manual.
If you can see DSE from your seat in normal viewing, and it bothers you, raise it while you can still return or exchange the screen. To photograph it, lock the camera's exposure on the grey (on most phones, press and hold on the screen), stand straight on, and take the picture from your seat as well as up close, so the photo shows what you see rather than exaggerating it.
Advertisement
Related checks
Unevenness that stays as a fixed shape, like a logo or a taskbar, is burn-in: try the OLED burn-in test. Single dots are pixel faults, which the dead pixel test finds, and smearing behind moving objects is response time, which the ghosting test shows. For a plain black screen to leave on, choose Black on the white and colour screens page. The greys here change no more than about three times a second, and the pan moves slowly, so nothing flashes.
Advertisement
Advertisement
Advertisement