Full-screen tool
White screen, black screen and any colour
Fill the display with plain white light, or pick black, red, green, blue or any colour you like, at full, half or low strength.
←→ colour↑↓ strengthF full screenEsc close
Which colour for which job
- White is a soft light for video calls, selfies and reading, a light box for negatives and tracing, and the background that shows dust, a tint or a dim corner on a display. Warm white flatters skin and is gentler at night; cool white is closer to daylight.
- Black checks an OLED screen, which should look switched off, shows light leaking around the edges of an LCD in a dark room, and keeps a second display dark without unplugging it.
- Red lights only the red part of each pixel, and at Low it is the light astronomers use because it spares night vision.
- Green and blue are chroma key backdrops for small shots, and pixel checks for their own colour.
- Pink, orange, yellow, purple, teal or a hex code give a coloured glow for photos and short videos, mood lighting for a dark room, or a full-size look at a brand or paint colour.
Strength sets the colour itself rather than the screen's backlight: Medium is 73% and Low 48% of each channel. Pick a colour on this page, press Start, and change colour or strength from the control bar or the arrow keys while it is on.
Advertisement
A white screen as a light
A laptop, tablet or spare phone set beside your camera and turned to white lights your face evenly, which helps most in a dim room or with a window behind you. A tablet gives softer light than a phone. Turn the device's brightness all the way up and switch off night mode or any blue-light filter, which tints the white yellow. For the round highlight in the eyes, the ring light draws a bright ring instead, and to trace on a tablet, the tracing light box locks touch so your hand doesn't interrupt it.
Black: OLED, light leaks and battery
On OLED and micro-LED screens, black pixels switch off, so a good panel looks the same as one that is turned off; a faint glow means an LCD with a backlight, or a setting such as dynamic contrast lifting the black. On an LCD in a dark room, black shows light leaking around the edges and corners, which the backlight bleed test looks at in detail. A black screen saves battery only on OLED, where black pixels draw almost nothing; an LCD's backlight stays lit whatever the picture.
Advertisement
Red, green and blue for pixel checks
Each pixel is made of separate red, green and blue elements, and a pure red, green or blue screen lights only one of them. A black dot on green is a green element that has failed; a dot that glows another colour is a neighbour stuck on. Use Full, sit close, and sweep the screen edge to edge. Green carries 0.7152 of a picture's brightness in the HD video standard ITU-R BT.709 (item 3.2), more than red and blue together, so a dead green element is the one you are most likely to notice; blue carries only 0.0722 and is the hardest to inspect, so a phone camera's zoom helps. The dead pixel test runs through every colour in one pass.
Red light for night vision
After dark the eyes rely on rod cells, which take a long time to adapt to darkness and lose that adaptation quickly in white light. Rods hardly respond to deep red: the CIE's night-time sensitivity curve (CIE 018:2019) is under 1% of its peak at 620 nanometres. Choose Red at Low, turn the device's brightness right down and keep it at arm's length to read a star chart without losing your night vision.
Advertisement
Green and blue screens for chroma key
Chroma keying removes one colour from video and puts another picture in its place. For small shots, a tablet showing flat green is all the backdrop you need, or film a phone showing green and key in a clean recording of its screen afterwards. Green is the usual choice because most camera sensors use the filter pattern Bryce Bayer patented for Kodak in 1976 (US patent 3,971,065), in which half the photosites see green, giving the crispest edge. If the subject has green in it, a plant or a green jumper, use blue, which also casts less coloured light on the subject.
If the backdrop glows or clips on camera, step down to Medium or Low here rather than lowering the device's brightness, since many screens dim by flickering the backlight, which a camera can record as rolling bands. Switch off Night Shift and eye-comfort modes, leave a gap between subject and screen, and film it square on.
Advertisement
Any colour, by hex code
Type a six-digit hex code such as FF4FA3, with or without the #, or a three-digit short form such as F80, or open your system's own picker. The same code can look slightly different from one screen to the next, since screens differ in colour range and settings; the colour gamut test shows whether yours shows wide colour. A bright screen uses more battery, so plug in for long calls, and on most phones and computers the screen stays on while the colour is showing.
Advertisement
Advertisement
Advertisement